#!/bin/sh


FRMFOL="coconfrm"


if [ ! `which wget` ];
then
  echo "Error: wget is not found."
  exit 2
fi

if [ ! `which tar` ];
then
  echo "Error: tar is not found."
  exit 2
fi

mkdir coconfrm


echo "Welcome to opencocon firmware downloader (Linux 3.10 based)."

# Broadcom
echo -n "Download Broadcom bcm43xx firmware? (y/n) : "
read b43_dl

if [ "$b43_dl" = "y" ];
then
  wget -O $FRMFOL/broadcom-wl-5.100.138.tar.bz2 "http://www.lwfinger.com/b43-firmware/broadcom-wl-5.100.138.tar.bz2"
  wget -O $FRMFOL/wl_apsta-3.130.20.0.o "http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o"

  if [ ! -r "$FRMFOL/broadcom-wl-5.100.138.tar.bz2" -o ! -r "$FRMFOL/wl_apsta-3.130.20.0.o" ];
  then
    echo "ERROR: Download failed."
    exit 3
  fi

  tar -xjf $FRMFOL/broadcom-wl-5.100.138.tar.bz2 -C $FRMFOL
  mv $FRMFOL/broadcom-wl-5.100.138/linux/wl_apsta.o $FRMFOL

  if [ ! -r "$FRMFOL/wl_apsta.o" ];
  then
    echo "ERROR: Extract failed."
    exit 3
  fi

  rm -r $FRMFOL/broadcom-wl-5.100.138
  rm $FRMFOL/broadcom-wl-5.100.138.tar.bz2

  echo "Okey. Broadcom bcm43xx firmware is ready on $FRMFOL."
fi


# Intel
echo -n "Download Intel ipw2x00 firmware? (y/n) : "
read ipw_dl

if [ "$ipw_dl" = "y" ];
then
  wget -O $FRMFOL/firmware-ipw2x00.copyright "http://sources.debian.net/data/non-free/f/firmware-nonfree/0.40/debian/firmware-ipw2x00.copyright"

  if [ ! -r "$FRMFOL/firmware-ipw2x00.copyright" ];
  then
    echo "ERROR: Download failed."
    exit 3
  fi

  echo "So, For using ip2x00 firmware, you must read and agree license. Push [Enter] to read license."
  read nul_in
  more  $FRMFOL/firmware-ipw2x00.copyright
  echo "Agree the License? (y/n)"
  read ipw_ag

  if [ "$ipw_ag" = "y" ];
  then
    # Download firmware
    wget -O $FRMFOL/ipw2100-1.3-i.fw "http://sources.debian.net/src/firmware-nonfree/0.40/ipw2x00/ipw2100-1.3-i.fw"
    wget -O $FRMFOL/ipw2100-1.3-p.fw "http://sources.debian.net/src/firmware-nonfree/0.40/ipw2x00/ipw2100-1.3-p.fw"
    wget -O $FRMFOL/ipw2100-1.3.fw "http://sources.debian.net/src/firmware-nonfree/0.40/ipw2x00/ipw2100-1.3.fw"
    wget -O $FRMFOL/ipw2200-bss.fw "http://sources.debian.net/src/firmware-nonfree/0.40/ipw2x00/ipw2200-bss.fw"
    wget -O $FRMFOL/ipw2200-ibss.fw "http://sources.debian.net/src/firmware-nonfree/0.40/ipw2x00/ipw2200-ibss.fw"
    wget -O $FRMFOL/ipw2200-sniffer.fw "http://sources.debian.net/src/firmware-nonfree/0.40/ipw2x00/ipw2200-sniffer.fw"

    if [ ! -r "$FRMFOL/ipw2100-1.3-i.fw" -o ! -r "$FRMFOL/ipw2100-1.3-p.fw" -o ! -r "$FRMFOL/ipw2100-1.3.fw" -o ! -r "$FRMFOL/ipw2200-bss.fw" -o ! -r "$FRMFOL/ipw2200-ibss.fw" -o ! -r "$FRMFOL/ipw2200-sniffer.fw" ];
    then
      echo "ERROR: Download failed."
      exit 3
    fi

    echo "Okey. Intel ipw2x00 firmware is ready on $FRMFOL."

  else
    echo "Okey, skip ipw2x00."
  fi

fi

# Prism54
echo -n "Download Prism54 firmware? (y/n) : "
read p54_dl

if [ "$p54_dl" = "y" ];
then
  wget --no-check-certificate -O $FRMFOL/isl3886pci "http://daemonizer.de/prism54/prism54-fw/fw-softmac/2.13.25.0.arm"
  wget --no-check-certificate -O $FRMFOL/isl3886usb "http://daemonizer.de/prism54/prism54-fw/fw-usb/2.13.1.0.lm86.arm"
   wget --no-check-certificate -O $FRMFOL/isl3887usb "http://daemonizer.de/prism54/prism54-fw/fw-usb/2.13.25.0.lm87.arm"

  if [ ! -r "$FRMFOL/isl3886pci" -o ! -r "$FRMFOL/isl3886usb" -o ! -r "$FRMFOL/isl3887usb" ];
  then
    echo "ERROR: Download failed."
    exit 3
  fi

   echo "Okey. Prism54 firmware is ready on $FRMFOL."
fi

echo "These firmware is stored in $FRMFOL. So copy this folder to ROOT DIRECTORY on opencocon-readable device (USB-memory, SD card, Harddisk etc)."
echo "Caution, These firmware is not for Redistributable. "
echo ""
echo "Thank you, kon-kon!"